Project GOBI 392

2020 Jeep Gladiator Originally With the 3.6L V6 Engine

This project was purchased with multiple roles to fill. First it needed to be a good fishing rig as we spend a good amount of time on the beach camping and fishing. We also wanted it to be reliable and capable on long trips for shows and it had to be built for the trails. This rig is not meant to be a rock crawler but it could be if needed as it will be traveling to Moab very soon!

PROJECT GOBI 392

Engine & Drivetrain

Americas Most Wanted 4×4 392 SRT Hemi Swap with 505HP and 475lb-ft of torque
Heavy duty Automatic Transmission
Factory Rubicon Transfer Case
Factory Dana 44 Axles with 4.10 Gears
Adams Front and Rear 1350 Driveshafts

Body & Suspension

Mopar 2 inch Coils with Fox 3.0 Shocks
Fox 2.0 ATS Steering Stabilizer
Synergy Track Bar and Sector shaft Brace
KMC Tank 17×9 Beadlock Wheels
Milestar Patagonia 38×13.50 17 Tires
American Adventure Labs Front Inner Fender Liners
Rock Slide Engineering 3rd Gen Power Rock Sliders
JCR Tall Bed Rack
OVS 270 Degree Awning on Custom Mount
Zarges Aluminum Storage Boxes On Bed Rack
Camo/Topo Wrap done by Atlantic Wraps

Lighting & Electrical

Warn VR 10000k Winch with C4RS Synthetic Winch Cable
Factor 55 Ultrahook
Baja Designs Amber LP6 Pro Lights on Front bumper
Baja Designs SAE Fog Light Kit
Baja Designs XL Sport Ditch Lights on Baja Designs Brackets
Baja Designs S2 Pro’s Mounted To Bed Rack
Dakota Lithium 100AH Secondary Battery In Bed
Redarc BCDC 25 Amp Dual battery/Solar Charger
Renogy 100 Watt Solar Panel
Dometic CFX3 35 Fridge
DFG Offroad Fridge Slide
ARB Twin Compressor Mounted Behind Drivers Side Fenderwell
Grimm Offroad ARB Twin Compressor Mounting Kit

Current Projects

Teraflex 3 inch Long Arm Suspension Kit with Falcon 3.3 Shocks
PSC Hydro Steering Kit
Dana 60 Front and Rear Axles with 4.88 ARB Air Lockers
KMC Grenade Crawl 17×9 Beadlock Wheels
Nitto 40×13.50 17 Trail Grapplers